ITA  |  FRA  |  ENG


Support for the treatment process is provided throughout every stage by computerized control and management systems. This allows for greater operational flexibility and precision, so as to better meet the needs of a demanding clientèle, and provides additional incentives and motivations for product research and technological advances. Our plant has large yards and is equipped with lift trucks with a capacity of up to 8 tons. This allows for a suitable and rapid flow of materials during loading and unloading, as well as during treatment. If necessary, treated goods can be stored in our storage facility for long periods of time. The movement of goods and materials within our facility is safely performed by overhead travelling cranes with a capacity of up to 15 tons.
Production is divided into two shifts, employing a total of approximately 90 operators who, together with a well-trained and strongly motivated technical staff, are able to offer highly professional and efficient service, from the design stage of the fabricated articles to be galvanized through the final inspection of the finished products. In recent years, hot galvanizing treatment's scope of application has broadened. Today it encompasses a vast range of articles from every sector of the civil and industrial spheres.




Treatment consists of 8 cycles:



2 stations - 200 cubic metres of degreasing solution
Products: Acidic surfactants
Operating temperature: 30C
Integrated mechanical agitation system


14 stations 1200 cubic metres of pickling solution
Products: Hydrochloric acid and corrosion inhibitors
Operating temperature: 20/30C
Integrated mechanical agitation system



1 station - 100 cubic meters of solution
Products: Water, chlorides and additives
Operating temperature: ambient
Continuous de-ironing treatment


1 station - 100 cubic meters of solution
Products: Zinc Ammonium Chloride with additives
Operating temperature: 35/40C
Patented process with HAl-Ga Technology


4 postazioni - accumulo automatizzato.
Temperatura di esercizio: 80 >110C
Recupero di calore dal forno di zincatura.


1 kettle dimensions of 14,000 x 1,800 x 3,300 mm
Products: SHG zinc 99.995%

no Pb - no Ni
Operating temperature: 443C
Class 1 Bath

Patented HAl-Ga Technology


7 stations air drying
1 tank quenching in water
Heat recovery system


1 station - 100 cubic metres of passivation solution
5 stations - drying and automatic holding
Products: chromium-free metal salts solution
Operating temperature: ambient


Preheating the materials in the drier serves the purpose of perfectly drying the fabricated articles, thus preventing any possible residual liquids from causing dangerous explosions during the articles' immersion in the zinc bath. Fabricated articles to be galvanized are heated to temperatures near 100C, thus reducing the thermal shock undergone by the materials themselves and reducing the chance that they might undergo distortion. The installation is directly connected to the hermetically sealed tunnel-style pretreatment unit, with its completely automated cycle of operations and total fume capture and abatement system. It has a drying capacity of up to 30t/h. Immediately following fluxing, the materials are automatically introduced into the tunnel drier; the 4 holding stations allow every rack to be given the suitable amount of time required by the process. The temperatures and the lengths of time each rack remains in the drier are automatically recorded over time.

4 postazioni - accumulo automatizzato.
Temperatura di esercizio: 80 >110C
Recupero di calore dal forno di zincatura.