ITA  |  FRA  |  ENG

THE TREATMENT PROCESS

Support for the treatment process is provided throughout every stage by computerized control and management systems. This allows for greater operational flexibility and precision, so as to better meet the needs of a demanding clientèle, and provides additional incentives and motivations for product research and technological advances. Our plant has large yards and is equipped with lift trucks with a capacity of up to 8 tons. This allows for a suitable and rapid flow of materials during loading and unloading, as well as during treatment. If necessary, treated goods can be stored in our storage facility for long periods of time. The movement of goods and materials within our facility is safely performed by overhead travelling cranes with a capacity of up to 15 tons.
Production is divided into two shifts, employing a total of approximately 90 operators who, together with a well-trained and strongly motivated technical staff, are able to offer highly professional and efficient service, from the design stage of the fabricated articles to be galvanized through the final inspection of the finished products. In recent years, hot galvanizing treatment's scope of application has broadened. Today it encompasses a vast range of articles from every sector of the civil and industrial spheres.

 

 

 

Treatment consists of 8 cycles:

 

DEGREASING

2 stations - 200 cubic metres of degreasing solution
Products: Acidic surfactants
Operating temperature: 30°C
Integrated mechanical agitation system

PICKLING

14 stations – 1200 cubic metres of pickling solution
Products: Hydrochloric acid and corrosion inhibitors
Operating temperature: 20/30°C
Integrated mechanical agitation system

 

RINSING

1 station - 100 cubic meters of solution
Products: Water, chlorides and additives
Operating temperature: ambient
Continuous de-ironing treatment

FLUXING

1 station - 100 cubic meters of solution
Products: Zinc Ammonium Chloride with additives
Operating temperature: 35/40°C
Patented process with HAl-Ga ® Technology

PREHEATING

4 postazioni - accumulo automatizzato.
Temperatura di esercizio: 80 >110°C
Recupero di calore dal forno di zincatura.

GALVANIZING

1 kettle – dimensions of 14,000 x 1,800 x 3,300 mm
Products: SHG zinc 99.995%

no Pb - no Ni
Operating temperature: 443°C
Class 1 Bath

Patented HAl-Ga® Technology

COOLING

7 stations – air drying
1 tank – quenching in water
Heat recovery system

PASSIVATION

1 station - 100 cubic metres of passivation solution
5 stations - drying and automatic holding
Products: chromium-free metal salts solution
Operating temperature: ambient

FLUXING

Fluxing is crucial for obtaining a correct zinc coating. The installation has a capacity of 100 cubic metres. It is housed in a hermetically sealed tunnel-style pretreatment unit with a completely automated cycle of operations, equipped with an acid fume capture and abatement system. Immediately following rinsing, the materials are automatically immersed in the fluxing bath. Immersion times for each rack are set based on the requirements of the process and are recorded over time. Following their immersion in the flux solution, the fabricated articles are coated in a thin film of salts to protect them from oxidation while they are in the drier. These salts facilitate the proper iron-zinc reaction during immersion in the zinc bath. Additives required for the use of the HAl-Ga ® Technology are added to the fluxing bath. The fluxing bath is pH-controlled and kept at a temperature of 35/40 °C; the solution is monitored through periodic analyses.

1 station - 100 cubic meters of solution
Products: Zinc Ammonium Chloride with additives
Operating temperature: 35/40°C
Patented process with HAl-Ga ® Technology